Firmware Releases

Flame Boss is always striving to improve your cooking experiences and sometimes that means updating the software that runs on your device (aka, firmware). Unless you uncheck the Auto Update Firmware box under Profile -> Your Device -> Settings, your device will update automatically.

Remember to update your mobile apps to access the latest features of your controller or thermometer.

If you’re hungry for more details about the firmware updates, here you go!

Version 4.25 (February 15, 2022)

  1. Reliability improvements for FB400, EGG Genius, FB500, & FB Thermometer devices.

Version 4.24 (November 15, 2021)

  1. Minor enhancements for FB400 and EGG Genius controllers.
  2. Minor enhancements for FB500 controllers (Released December 1, 2021).

Version 4.23 (September 24, 2021)

  1. Reliability improvements for FB400 and EGG Genius controllers.
  2. Reliability improvements for FB500 controllers (Released October 1, 2021).

Version 4.22 (July 28, 2021)

  1. Reliability improvements for FB400 and EGG Genius controllers only.

Version 4.21 (March 24, 2021)

  1. Reliability improvements for FB400 and EGG Genius controllers only.

Version 4.20 (July 29, 2020)

  1. Added way to turn off pit and meat alarm sounds remotely from mobile apps.
  2. Reliability improvements.

Version 4.19 (May 27, 2020)

  1. Added a wifi_scan downlink so apps can get an updated AP scan from the controller.
  2. Added a wifi_cx downlink so apps can get get an updated RSSI from the controller.
  3. Added a dns downlink to support custom DNS configuration.
  4. Added a ntp downlink to support custom NTP configuration.
  5. Fixed buzzer not working on 500.
  6. Started sending stack to server on crashes on headless devices to help find and fix crashes in the future.
  7. Fixed some assertion errors, crashes and other reliability improvements.

Version 4.18 (March 18, 2020)

  1. Bug fixes.
  2. Updated WiFi module firmware to 3.1.1 for reliability improvements.

Version 4.17 (March 12, 2020)

  1. Bug fixes and other minor enhancements.

Version 4.16 (January 10, 2020)

  1. Updated WiFi module firmware to 3.1.0 for reliability improvements.

Version 4.15 (December 17, 2019)

  1. Reliability improvements.

Version 4.14 (November 22, 2019)

  1. Reliability improvements.

Version 4.13 (November 19, 2019)

  1. Reliability improvements.

Version 4.12 (September 24, 2019)

  1. Reliability improvements in WiFi performance.
  2. Other minor enhancements.

Version 4.11 (July 31, 2019)

  1. Improved blower driver to handle higher CFM blowers.
  2. Added local access security setting to WiFi Menu of FB 500.
  3. Other minor improvements.

Version 4.10 (June 13, 2019)

  1. No longer reset PIN during factory resets because it caused devices
    to not be able to be added automatically during WiFi setup.
    (Users can still reset the PIN on the web app and mobile apps.)
  2. Improved protocol to handle events like pit alarms and meat alarms
    and not cause multiple notifications
  3. No longer switch to secondary WiFi configuration when successfully associated.
    This makes Local Connect mode more reliable.
  4. Other minor improvements.

Version 4.09 (May 12, 2019)

  1. On 200 and 300: fixes silencing alarm remotely.
  2. On 400 and EGG Genius: Avoid disconnects during TCP error recovery.

Version 4.08 (May 10, 2019)

  1. Reliability improvements in WiFi performance.

Version 4.07 (May 3, 2019)

  1. Reliability improvements in WiFi performance after WiFi reset.

Version 4.06 (Apr 16, 2019)

  1. Fixed problem causing disconnects

Version 4.05 (Apr 11, 2019)

  1. Fixes to over the air downloading of wifi module firmware
  2. Bug fixes and other minor enhancements

Version 4.04 (Apr 2, 2019)

  1. Fixes to over the air downloading
  2. Bug fixes and other minor enhancements

Version 4.03 (Mar 25, 2019)

  1. Update WiFi firmware to 3.0.0.0
  2. Bug fixes and other minor enhancements

Version 4.02 (Mar 6, 2019)

  1. Fixes for static IP configuration
  2. Boot loader version 2.1 to fix revert feature
  3. Bug fixes and other minor enhancements

Version 4.01 (Feb 15, 2019)

  1. Supports new Flame Boss 500 controller
  2. Bug fixes and other minor enhancements

Version 4.00 (Feb 5, 2019)

  1. Added Local Connect so your mobile device can connect to your controller when the Internet is not available
    by connecting to the controller directly over the Local Area Network (LAN).
  2. Added Direct Connect so your mobile device can connect to your controller when no Internet nor LAN is available
    by connecting to the controller directly while the controller is in AP Mode.
  3. Switched from a custom binary protocol to JSON over MQTT for easier integration with other network devices and services.
  4. Bug fixes and other minor enhancements

Version 3.01 (Aug 18, 2018)

  1. Bug fixes on FB200V2/FB300 controllers

Version 3.00

  1. Support new Flame Boss 400 controller
  2. Bug fixes

Version 2.08

  1. Fixed Network Mask input for Static IP configuration settings
  2. Support spaces in SSID when using browser provisioning
  3. Bug fixes and other minor enhancements

Version 2.07

  1. Bug fixes

Version 2.06

  1. Removed unnecessary factory reset to improve ease of use
  2. Local connection support
  3. Custom discovery protocol for finding controllers automatically on LAN
  4. mDNS or Bonjour support (but only works for 5 minutes after controller joins network due to issue with WiFi module)
  5. Alerts for probe and controller over-temp conditions
  6. Bug fixes and other minor enhancements

Version 2.02-2.05

  1. Added back the maximum open pause setting (find it in Other Menu)
    so users can set
    the maximum time that the controller will stay in open pit mode.
  2. Added bug fixes and other minor enhancements.

Version 2.01

  1. Replaced the open pause setting with a zero-configuration open-close method.
  2. Modified the screens and menu flow to accomodate more features.
  3. Added AP-mode provisioning that works with mobile apps
    (iPhone now, Android soon, on FB200v2 and FB300 models only).
  4. Added support for advanced network settings,
    including static IP network configuration and
    showing IP and MAC addresses.
  5. Added hide-PIN option.
    When configured, the controller stops showing WiFi status on first connect,
    and quits showing the PIN when WiFi status is shown at other times.
  6. Added browser provisioning for configuring WiFi in AP mode or station mode
    from any device with a web browser
    (for FB200v2 and FB300 models only).
  7. Added bug fixes and other minor enhancements.

Version 2.00

  1. Started logging data to flash while controller is offline (FB200v2+ controllers only)
  2. Bug fixes

Version 1.95

  1. Bug fixes

Version 1.94

  1. Fixed validation of meat alarm temps, broken in 1.93

Version 1.93

  1. Improved validation of AP list input from wifi module to prevent crashes on lines not formatted correctly

Version 1.92

  1. Supports Flame Boss 300 access point mode provisioning
  2. Improved wifi scanning to avoid crashing when wifi module sends improperly formatted scan results
  3. Upgraded ARM toolchain for improved diagnostic capability

Version 1.23-1.91

Various changes to improve your Flame Boss experience.

Version 1.22

  1. To help keep users’ WLAN passwords secure, hide WLAN passwords by hiding all but the last two characters.
  2. Fix to handle wifi passwords longer than 16 characters.
  3. Save configuration for last three WLANs that were configured or connected so users do
    not have to re-enter passwords for up to 3 WLANs.
  4. For non-hidden SSIDs use the security type of the scanned SSID entry if it is
    different from the one configured, after trying to connect to the configured WLANs.
    This essentially auto-corrects (slowly) the wifi configuration if user entered the wrong
    security type.
    If the controller connects with the scanned security type, the scanned security type replaces
    the configured security type so future connections are faster (tried before scanning).
  5. Show WLAN connected and DHCP connected states separately in wifi status view to help
    diagnose WLAN connectivity issues.
  6. Doubled frequency of wifi task to make downloads run faster.
  7. Upgrade Texas Instruments wifi module (CC3000) firmware to patch level 1.32.
  8. Show more information when in open wait mode including the time left before
    normal operation resumes.
  9. Add the firmware version screen to the menu.
  10. Lower max set temp to 450 F to help protect temperature probes.

Version 1.16

The initial release of Flame Boss 200.